ClearKlens IPA VH1 4x5L

ClearKlens IPA is a ready to use disinfectant for the Pharmaceutical cleanroom industry. ClearKlens IPA is based on 70% v/v Isopropyl alcohol. ClearKlens IPA is available as 900mL bag in bottle trigger spray, and as 1L bottle or 5L canister. The 900mL bottle has been filtered to 0.2µm and irradiated. The 1L/5L has been filtered to 0.2µm and aseptically filled.

• ClearKlens IPA is a solution of 70% v/v Isopropyl alcohol and 30% water for injection (USP quality).
• ClearKlens IPA is a ready to use product for the disinfection of work surfaces and process equipment in cleanrooms
• ClearKlens IPA 900mL trigger spray is an antisuck back- bag in bottle delivery system to eliminate product contamination during use
• ClearKlens IPA is a BPR supported pack and formulation

• Ready to use
• 0.2µm filtered
• Gamma irradiated/aseptically filled and double bagged
• Detex labelled for proof of irradiation
• Double bagged for easy transfer into the cleanroom
• Odourless and Non tainting
• Effective broad-spectrum activity

Clean and dry the surface before disinfection.

Spraying:
Spray the surface, wipe if necessary to spread the product. Make sure to wet the surface completely. Allow to take effect for at least 30 seconds. Used cloths must be disposed in a closed container.

• Sterile trigger (bag in bottle): apply 16 sprays / m² surface
• Trigger spray pouch: apply 19 sprays / m² surface

Cloth:
Wet the cloth with the disinfectant and wipe the surface. Make sure to wet the surface completely. Allow to take effect for at least 30 seconds. In cleanrooms, the exact amount of required product can also be dispensed either using a low flow-rate spray lance or into a bucket via a system of pipes. Used cloths must be disposed in a closed container.

Mopping:
Wet the mop with the disinfectant and mop the surface. Make sure to wet the surface completely. Allow to take effect for at least 30 seconds. Used mops must be stored in a closed container.

Non-porous Glove disinfection:

Automatic dosing:

Apply 3 mL of the product directly onto clean gloved hands, distribute evenly and make sure to wet the surface completely. Allow to take effect for at least 30 seconds.

Manual dosing:

Spray 3 mL of the product directly onto clean gloved hands, distribute evenly and make sure to wet the surface completely. Allow to take effect for at least 30 seconds. Number of applications per type of packaging, necessary to apply 3 mL product onto clean gloved hands:

- Trigger spray pouch: apply 3 sprays of the product to two hands
- Sterile trigger (bag in bottle): apply 3 sprays of the product to two hands